BODY 6 3. BONNET LATCH RELEASE CABLE REMOVAL 1. Open the bonnet. 2. Pull out the cable from the lock assembly. 3. Loosen and remove mounting fasteners of hood release lever and remove the lever. 4. Remove locking pin 5. Disconnect the cable from hood release lever. 6. Pull out and remove the cable from the engine compartment. CAUTION Do not pull the hood latch cable from inside of cab it can damage the rubber grommet. FITMENT NOTE Check the condition of the rubber grommet, if found damaged replace the same at the time of fitment. For fitment follow the reverse procedure of removal. 4. FLOOR CONSOLE REMOVAL 1. Pull up Carry hook and GSL access cover. 2. Pull out front side panel assembly. 3. Pull up Gear shifter bezel with bellow.
RkJQdWJsaXNoZXIy MTIwNTUz