BRAKES 53 F. REMOVAL OF PARKING BRAKE LEVER 1. Position the car in the two-post lift. 2. Place the Parking Brake in Fully released position. 3. Remove the center console located in the cabin. 4. Disconnect the electrical connection to parking brake lever. 5. Remove the parking brake adjustment nut, guide pin and remove the equalizer from the parking brake lever. 6. Unscrew 2 Mounting bolts of Parking Brake lever and take out the Assembly. 7. After removing the Parking Brake Lever, lift the car up. INSTALLATION OF PARKING BRAKE LEVER 1. Proceed in the reverse order of removal. 2. Tighten the mounting bolts of the parking brake lever to the torque specified. 3. Adjust the parking brake cable slackness as per the procedure given below. 4. Reconnect the electrical connections to the parking brake switch assembly and confirm that the parking brake lamp becomes “ON” when parking brake lever is at first notch.
RkJQdWJsaXNoZXIy MTIwNTUz