AMT KIT 16 spare gasket, with care to avoid contamination from foreign materials (dust, metal burrs, etc.) or surface damages. Assemble the O-rings on the connectors. Mount the connectors with O-rings in their “Power Unit Base Plate” seats, after lubrication with new ‘CS Speed’ oil. Lubricate with new ‘CS Speed’ oil the “Mechatronic Gear Actuator” seats for connectors with O-rings. Assemble the gasket on the “Mechatronic Gear Actuator” with the correct orientation, inserting the centering pins into the fixing holes of the “Mechatronic Gear Actuator” body. Position the “Mechatronic Gear Actuator” with gasket over the “Power Unit Base Plate”, using for reference the threaded rods and moving it parallel towards the mating surface. When the “Mechatronic Gear Actuator” body seats come in contact with O-rings push it slowly with appropriate load to complete the assembly. Unscrew the rods and screw without tighten the three screws for fixing the “Mechatronic Gear Actuator” on “Power Unit Base Plate”.
RkJQdWJsaXNoZXIy MTIwNTUz