DRIVESHAFT_PETROL 14 6. Align the seal bigger diameter on the housing and position the big seal retaining clamp in its place and swage the large seal-retaining clamp using spanner Please tighten alternatively between two bolts (i.e. don’t tighten one bolt alone completely at a time). 14. DISASSEMBLY AND ASSEMBLY OF CV JOINT ASSEMBLY (OUTER): DISASSEMBLY PROCEDURE 1. Clean the shaft thoroughly using cleaning solvent and hold the shaft at the middle of the axle shaft in the vice. 2. Remove the large seal retaining clamp from the CV joint with a side cutter or a screwdriver with rounded tip and discard. 3. Remove the small seal retaining clamp from the axle shaft with side cutter or screw driver with rounded tip) and discard. Slide the seal away from the joint along the axle shaft.
RkJQdWJsaXNoZXIy MTIwNTUz