DRIVESHAFT_PETROL 7 9. ON VEHICLE ASSEMBLY OF DRIVE SHAFT (LH & RH SIDE) 1. Install the Drive shaft into Knuckle End. 2. Install the Drive shaft into Gear Box End. 3. Insert the LCA ball joint in knuckle & tighten the mounting fastener with torque 5.5 Kg-m. 4. Insert the steering Link ball joint into knuckle & tighten the nyloc nut with torque 7 ± 0.5 kgm. 5. By Using allen Key and Connect Upper ARB Link onto the Front Strut. 6. Apply Brake and Tighten Drive shaft Lock Nut. 7. Fix Mud liner front RH. 8. Position wheel and tighten the front wheels Nuts.
RkJQdWJsaXNoZXIy MTIwNTUz