TRANSAXLE - TA65 Star 47 28. Stake the collar of both lock nuts on lay haft and input shaft. 29. Check the correct positioning of shifter shaft by moving gear shifter shaft assembly in neutral. Assemble the speedo sensor back on the rear housing. 30. Fix Top Cover Asembly. 31. Fix Neutral Speed Sensor. 32. Fix Cable Anchor Bracket. 33. Place assembly rear cover with liquid gasket on housing (rear half) and fix it by assembly hex screws (3Nos.). NOTE: Clean the front half and rear half interfaces/ so that no cured and dried liquid gasket remained are left on the machined surfaces. 34. Unlock the input shaft from below. 35. Fix reverse light switch on housing (rear half), 36. Fix magnetic drain and filter plugs with new washers. 37. Fix the C-mount bracket on the gear box front housing. 38. Fix the B-mount bracket in the correct orientation. 39. Unscrew 3 mounting bolts (M8) and dismount the transaxle assembly from adaptor plate on work sand.
RkJQdWJsaXNoZXIy MTIwNTUz