TRANSAXLE - TA65 Star 24 13. ON VEHICLE ASSEMBLY OF TRANSAXLE: 1. Tie actuating lever of clutch in clutch disengaged position. Place clutch release bearing (replace by new one if required) on input shaft and locate it properly. 2. Lift the transaxle assembly using support stand. 3. Fix ‘B’ mount bracket on transaxle. 4. Support and lower the engine assembly slightly and align transaxle assembly with engine assembly. 5. Fit clutch housing on to engine and locate bolts and tighten them. 6. Fix the ‘B’ mount nut and tighten it to specified torque. 7. Locate and fix ‘B’ mount rubber pad on bracket below the battery tray. 8. Fix ‘C’ mount bracket to transaxle housing and remove engine support. 9. Fill transaxle oil through filler plug. 10. Connect reverse light switch connection. 11. Connect gear shift cables.
RkJQdWJsaXNoZXIy MTIwNTUz