ELECTRICAL 77 4. Disconnect the electrical connection of switch, glove box lamp. 5. Disconnect the electrical connection of glove box lamp. 6. Take out the glow box. 7. Pull out the fuse from fuse box modules from available cutout as shown below 8. Check the fuse of required function with help of fuse box sticker present at shown location 9. If fuse is blown, replace with same rating fuse from spare fuses provided in engine compartment fuse box 10. Fit back the glove box by following reverse procedure. REPLACEMENT PROCEDURE FOR RELAYS 1. Turn the ignition key to lock position. 2. Check each relay, if faulty replace with same rating relay. 3. If replaced relay of same rating is not working properly, there is probably a serious electrical problem. REPLACEMENT PROCEDURE FOR FUSES 1. Turn the ignition key to lock position. 2. Check each fuse and look for broken/open controls link wire inside the fuse. If it is burnt, replace it with one of the spare fuses of same rating. 3. If replaced fuse of same rating burns out then, there is probably a serious electrical problem. Note: Use designated fuses only. CIRCUIT SCHMATICS Refer Book 3 DTCs Refer Book 2
RkJQdWJsaXNoZXIy MTIwNTUz