SUSPENSION 30 15. INSTALLATION OF SUBFRAME ASSEMBLY Follow the Reverse Procedure of removal of sub frame assembly. Sub frame to be aligned to BIW with help of Sub frame Fixture RH / LH 541258903101. Locating holes are available in sub frame & BIW at rear. For tightening sub frame bolts, 6 point hex head socket is recommend. Don’t use 12 point hex socket. NOTE: Do not reuse subframe mounting bolt. It is only for one time use. Do not reuse the lower ball joint to knuckle mounting bolt & LCA front pivot bolt. Use Torx hex socket for tightening of LCA front pivot bolt. 16. LCA REAR HYDRA-BUSH INSTALLATION 1. Place the bracket on the press table and place the bush on the top. 2. Press the bush until it fits completely into the bracket.
RkJQdWJsaXNoZXIy MTIwNTUz