6F33 TRANSAXLE 37 14. ASSEMBLY GEARSHIFT CONTROL CABLE 1. Install gear selector and shifter cable mountings on Body. Perform neutral setting for gear shifter cable as follows 2. Before fitment of ball joint end of shift cable, Ensure all other fitment of cable and shifter is done properly. 3. Ensure Gear shifter select lever is in “N” mode (Neutral Mode). Ensure locking pin is pressed in N mode. 4. Assemble the shifter side cable conduit end fitting in U slot of gear shifter housing. 5. Assemble the transaxle side cable conduit end fitting (press fit) in cable anchoring bracket. 6. Snap fit the cable end on cylindrical pin of select lever of gear shifter assembly.
RkJQdWJsaXNoZXIy MTIwNTUz