6F33 TRANSAXLE 21 CAUTION Please replace the new locking pin, the locking pin bending or do not role of guide, during the adjustment operation. Never reuse spring washer and nut. NOTE Use locking pin when you align inhibitor switch and manual control lever. E. INSTALL OIL-SEAL 1. Install the Oil-seal (A, B) used by installer jig. NOTE Apply ATF to ‘Oil-seal’ part before installation REMOVAL Removal is the reverse of installation F. ENG + TM DOCKING PROCESS FOR TML 1. Check the condition of the packed AutoTransmission T/C strap fixing status. 2. The T/C fixing strap must be disassembled after the A/T docking palette is seated If you disassemble the T/C fixing strap first and move the A/T, it is very easy that the T/C will protrude from the specified position. 3. Align the Torque-converter to match the hole between flex-plate and Torque-Converter lug hole. NOTE: Start the bolting of flex plate from Slot hole on Flex plate. And Tight all bolts on Flex plate
RkJQdWJsaXNoZXIy MTIwNTUz