C635 TRANSAXLE 60 12.Install the needle bearing. 13.Install the reverse gear and the rear bearing using and a suitable press. DRIFT INSTALLER 2654 5890 2605 14.Install a NEW rear bearing retention bolt, tighten to the proper (Transmission and Transfer Case/Manual/Specifications). 24.REMOVAL BACKUP (REVERSE) LAMP SWITCH 1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable. 2. Remove the air cleaner body (Engine/Air Intake System/BODY, Air Cleaner/Removal and Installation). 3. Disconnect the backup lamp switch wire harness connector. 4. Remove the backup lamp switch.
RkJQdWJsaXNoZXIy MTIwNTUz