KRYOTEC ENGINE 161 E. CYLINDER HEAD AND OIL PAN FOR INSPECTION REMOVAL 1. Remove the oil pan drain plug (1) and drain the engine oil. 2. Disconnect the A/C compressor wire harness connector. 3. Remove the bolt (1) from the engine wire harness tray. 4. Disconnect the camshaft position sensor wire harness connector (2). 5. Disconnect the fuel injector wire harness connectors (3). 6. Disconnect the throttle body wire harness connector (1). 7. Disconnect the coolant temperature sensor wire harness connector (2). 8. Disconnect the EGR heat exchanger coolant solenoid wire harness connector (3). 9. Remove the bolt (4) from the engine wire harness tray. 10. Disconnect the crankshaft position sensor wire harness connector (1). 11. Disconnect the EGR solenoid wire harness connector (2). 12. Disconnect the engine oil pressure sensor wire harness connector (1).
RkJQdWJsaXNoZXIy MTIwNTUz