KRYOTEC ENGINE 158 103. Tighten the side bolts fixing the engine oil sump to the proper (Torque Specifications) using the 1860834000 tool. 104. Tighten the front and rear bolts fixing the engine oil sump to the proper (Torque Specifications) using 1860833000 tool. NOTE When handling the timing belt, avoid creating bends at an acute angle so as not to compromise the structure of the belt, as the stresses induced by excessive bending could result in damage not visible to the fibers inside, which could cause premature failure of the belt during operation of the engine. 105. Remove the 2000003000 engine timing tool (2). NOTE The yellow reference mark (1c) on the timing belt is the one that is in close proximity to the two yellow arrows (a). 106. Position the timing belt (1a) on the crankshaft sprocket (1b), taking care to match the yellow reference mark (1c) with the notch (1d). 107. The hole "a" is the reference for the final tensioning of the timing belt as described below.
RkJQdWJsaXNoZXIy MTIwNTUz