KRYOTEC ENGINE 149 13. Remove the screws (1a) and remove the rod cap (1b). 14. Remove the lower connecting rod bearing (2). 15. Remove the connecting rod and piston (3). 16. Remove the upper connecting rod bearing shell (4). 17. Repeat the procedure for removal of the pistons and connecting from the remaining cylinders. 18. Remove the crankshaft rotation tool. 19. Remove the screws (1a) and the rear crankshaft oil seal retainer (1b). 20. Check the crankshaft end play using a magnetic base fitted with a dial indicator. If the crankshaft end play is not within the required value, adjust the thickness of the crankshaft thrust bearings (Refer to 09 - Engine/ Specifications). 21. Remove the screws (1a) and the bearing caps (1b). 22. Remove the lower bearing shells (2). 23. Remove the crankshaft (3). 24. Remove the upper bearing shells (4). 25. Remove the thrust bearings (5).
RkJQdWJsaXNoZXIy MTIwNTUz