KRYOTEC ENGINE 138 8. ENGINE ON STAND A. CLUTCH REMOVAL 1. Install the 1860846000 flywheel holder tool (1). 2. Remove the three indicated clutch cover bolts (2). 3. Install the clutch centering tool (1) from the2000030800 tool kit. 4. Install the clutch compressor mounting posts (2) from the 2000040925 tool kit, into the previously removed bolt locations. 5. Install the clutch compressor tool (1) from the 1871003100 tool kit and rotate the handwheel to compress the clutch spring. 6. Remove the remaining clutch cover bolts (2). 7. Rotate the handwheel to unload the clutch spring. 8. Remove the clutch compressor and centering tools, clutch pressure plate and friction disc. 9. With the 1860846000 flywheel holder tool (1a) installed, remove the bolts (1b) and the flywheel (1c).
RkJQdWJsaXNoZXIy MTIwNTUz