KRYOTEC ENGINE 112 2. Install NEW lower exhaust manifold nuts (1) and tighten to the proper (Torque Specifications). 3. Install the oil indicator tube and securely tighten the bolt. 4. Install the oil indicator tube upper bolt and securely tighten. 5. Install the upstream exhaust temperature sensor into the Diesel Particulate Filter (DPF) (Refer to 11 - Exhaust System/SENSOR, Exhaust Temperature/Removal and Installation). 6. Install the right front wheelhouse splash shield (Refer to 23 - Body/Exterior/SHIELD, Splash/Removal and Installation). 7. Install the right front tire and wheel assembly (Refer to 22 - Tires and Wheels/Removal and Installation) . 8. Install the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 9. Connect the negative battery cable. O. INTAKE MANIFOLD REMOVAL 1. Remove the battery (Refer to 08 - Electrical/Battery System/BATTERY/Removal and Installation). 2. Remove the battery tray (Refer to 08 - Electrical/Battery System/TRAY, Battery/Removal and Installation). 3. Remove the engine cover (Refer to 09 - Engine/COVER, Engine/Removal and Installation). 4. Remove the belly pan (Refer to 13 - Frame and Bumpers/Under Body Protection/BELLY PAN/Removal and Installation). 5. Remove the starter (Refer to 08 - Electrical/Starting/STARTER/Removal and Installation). 6. Drain the cooling system (Refer to 07 - Cooling - Standard Procedure). 7. Remove the right front tire and wheel assembly (Refer to 22 - Tires and Wheels/Removal and Installation). 8. Remove the right front wheelhouse splash shield (Refer to 23 - Body/Exterior/SHIELD, Splash/Removal and Installation). 9. Remove the air cleaner body (Refer to 09 - Engine/Air Intake System/BODY, Air Cleaner/Removal and Installation). 10. Remove the fuel filter/water separator assembly (Refer to 14 - Fuel System/Fuel Delivery/FILTER, Fuel/ Removal and Installation). 11. Remove the fuel injection pump (Refer to 14 - Fuel System/Fuel Delivery/PUMP, Fuel Injection/Removal and Installation). 12. Remove the turbocharger (Refer to 09 - Engine/Turbocharger System/TURBOCHARGER/Removal and Installation). NOTE 120/140 CV 13. Remove the EGR cooler and manifold (Refer to 25 - Emissions Control/Exhaust Gas Recirculation, Diesel/ COOLER, Exhaust Gas Recirculation (EGR)/Removal and Installation). NOTE 170 CV
RkJQdWJsaXNoZXIy MTIwNTUz