KRYOTEC ENGINE 75 7. Remove damper pulley and then bottom timing cover along with idler. 8. Remove mounting screw of the bottom belt cover. Take out the bottom belt cover. 9. Remove one specific mounting bolt of the oil pump and tighten special tool bolt. 10.Install timing gear locking plate and tighten its mounting fasteners. NOTE Rotate the crankshaft timing belt pulley with small movements to allow insertion of the dowel pin through the hole on the tool. 11.Loosen the mounting fasteners and lower flywheel back plate. Insert flywheel locking tool. 12.Remove crankshaft timing gear locking tool. NOTE Crankshaft locking tool helps to identify correct timing gear position.
RkJQdWJsaXNoZXIy MTIwNTUz