KRYOTEC ENGINE 72 E. TANK UNIT REMOVAL CAUTION Unless replacement is necessary, Tank unit, fuel level sensor should not be removed from the tank since the rubber parts i.e. gasket, seals etc. may harden when exposed to air and light. Never apply an excessive force to the tank unit nipple or lead wire. This may result in bent or poor contact. 1. Relieve fuel pressure in fuel feed line. 2. Disconnect the negative battery cable. 3. Fold the 2nd row Seat and somersault it to access the in tank pump cut out. 4. Lift the carpet with foam at the cutout. 5. Remove mounting screw and open fuel inspection cover. 6. Disconnect the electrical connection of the fuel pump module. 7. Disconnect the fuel delivery line and the return line connecting fuel pump module. 8. Using Special tool (5412 5890 4701) unscrew the cam lock plate. 9. Hold the fuel delivery module, lift it in vertical direction so as to access the Quick connector and snap fit. 10.Disconnect the line which carries the fuel from passive side to active side by means of dislodging the snap fit provided at pump retainer. 11.Disconnect the QFC joint which carries fuel from active side to passive side. 12.Remove the in-tank pump from the tank carefully. NOTE Make sure breather line Quick connector is not getting stuck during fuel tank removal. Seals and gasket not to be reused. FITMENT For fitment follow removal procedure in reverse.
RkJQdWJsaXNoZXIy MTIwNTUz