ELECTRICAL 179 D. Checking Pairing status In the EMS-ECU software select “Engine Parameter 1”, then select “Electronic key” option and click START. One window will pop-up & shows below mentioned options. This window gives the current status of immobilizer system. i.e. Immo Programmed: Immobilizer enabled. Vehicle Not Locked: Vehicle ready for start. Vehicle locked: Vehicle will not start Immo code programmed and locked: Pairing operation OK. AES key is written in to EMS and locked. Immo code programmed and unlocked: Pairing operation not done properly. AES key is written in to EMS and Unlocked. Key code OK / Authentication OK: AES key for EMS ECU and ICU are same. Free starts Inactive: After locking AES, free starts are inactive. If AES is not locked free starts is active for 5 times. Immo CAN Communication OK: Proper communication. Otherwise it will show CAN communication “OFF”.
RkJQdWJsaXNoZXIy MTIwNTUz