KRYOTEC ENGINE 64 12. Insert Middle silencer assembly into rubber hangers. (Ensure proper orientation of silencer assy. rubber hangers). 13. Insert exhaust Front pipe assembly into exhaust main silencer assy up to stopper touch. Just hand tighten the fasteners of pipe in pipe joint clamp. 14. Insert exhaust tail pipe assembly into exhaust main silencer assy up to stopper touch. Just hand tighten the fasteners of pipe in pipe joint clamp. 15. Tight the bracket on front pipe bolt mounted on engine housing & apply the specified tightening torque. 16. Tight the pipe in pipe joint clamp nut & apply the specified tightening torque. NOTE Ensure flex bellow should not be pre stress or bend as shown in below figure & also ensure proper orientation of rubber hangers 17. Install engine underbody guard. 18. Install Snorkel and Air filter assembly. 19. Connect battery’s negative terminal.
RkJQdWJsaXNoZXIy MTIwNTUz