BODY 38 2.19 TAIL GATE REMOVAL 1. Open the tail gate. 2. Remove rear Quarter trims (for removal process refer rear Quarter trims removal process). 3. Remove rear ‘C’ Pillar trims (for removal process refer rear ‘C’ Pillar trim removal process). 4. Disconnect the tail gate all wiring harness located inside the “C” pillar trim and pull out the wiring harness from outside. 5. Remove the top hinge mounting of the tail gate by removing two mounting bolts. Follow the same procedure at the other end and separate the tail gate from the vehicle. FITMENT For fitment follow the reverse procedure of removal. NOTE 1. Ensure proper tightening torque is given to the hinges of tailgate. For torque value refer to the tightening torque table. 2. If shim is damage please replace as per below process. 3. Location Shim at Tailgate Inner Panel side to control the Rattling of Tailgate. 4. Remove the shim mounting screw and replace same procedure. Tail gate Opening from cabin 1. Sliding Direction.
RkJQdWJsaXNoZXIy MTIwNTUz