FATC 19 NOTE 1. The outside air intakes for the climate control system are at the base of windscreen. Keep this area clear from leaves and other debris. 2. The system should be used with recirculation air mode for faster heat up and cool down, however keeping the system in recirculation mode, particularly with AC OFF, can cause the windows fog up. CAUTIONS It is recommended to run the vehicle in re circulation mode to avoid clogging of air filter. 10. AUTO MODE During AUTO AC operation, the system automatically cuts off compressor at a higher temperature than normal AC. The operation can be used during mild weather conditions for better fuel efficiency. Comfort level may be compromised during this operation. 11. AUTO ON SELECTION BUTTON In the AUTO mode all the configurable parameters will be selected automatically except temperature selection To put the automatic climate control in fully automatic mode: a. Set the desired temperature by turning temperature control knob. b. Press the ‘AUTO’ button. c. The system automatically selects the proper mix of conditioned and/or heated air that will, as quickly as possible, raise or lowers the interior temperature to your preference. You can manually select various functions of the climate control system when it is in fully automatic mode. Making any manual selection causes the word ‘AUTO’ in the display to go OFF and overridden setting is displayed. 12. TEMPERATURE CONTROL KNOB Turning the temperature control knob clockwise increases the temperature of the air. Steps of 0.5 º C. will increase the desired temperature. User can select temperature range from 18ºC to 30ºC. Whereas the anti-clockwise direction decreases. The desired temperature selected by the user shall be updated in the display simultaneously as per the rotation of the knob. When you set the temperature to its lower limit (Lo) or its upper limit (Hi), the system performs to provide full cooling or heating respectively. It does not regulate the interior temperature
RkJQdWJsaXNoZXIy MTIwNTUz