HVAC 47 b) HEATER INLET HOSE ASSEMBLY 1. Remove clamp spring band from firewall side. 2. Remove quick connector from engine side. 3. Remove hose clamps attached to the firewall as shown in below figure. 4. Remove outlet hose. FITMENT For fitment follow the reverse procedure of removal. H. PRESSURE SWITCH REMOVAL AND ASSEMBLY 1. Remove Leaf cover Assembly. 2. Recover the refrigerant using standard recovering equipment. 3. Disconnect electrical connector. 4. Loosen and remove pressure switch. FITMENT For fitment follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz