KRYOTEC ENGINE 37 E. CRANKCASE 1. Inspect visually for crack or leakage in seals 2. Check cylinder bore for run outs. 3. Check cylinder bore for taper. 4. Check for scratch marks inside cylinder bore. NOTE In the case of refinishing, all cylinders bores must undergo the same increase. CYLINDER BORE Measure Value Internal diameter cylinder Bore - Class A (mm) 83.000 - 83.010 Internal diameter cylinder Bore - Class B (mm) 83.010 - 83.020 Internal diameter cylinder Bore - Class C (mm) 83.020 - 83.030 Cylinder Bore Out of Round (mm) < 0.05 Cylinder Bore Taper < 0.005 Oversize inner diameter cylinder bore (mm) 0.1
RkJQdWJsaXNoZXIy MTIwNTUz