BRAKES 46 3. Pull out Snaps on clutch master cylinder from clutch pedal. FITMENT OF CLUTCH MASTER CYLINDER ASSEMBLY For fitment follow the reverse procedure of clutch master cylinder removal. CONTROL BRACKET REMOVAL 1. Remove Brake pedal Assembly. (Follow Brake pedal Removal procedure) 2. Remove Accelerator pedal Assembly. (Follow Accelerator pedal Removal procedure as above mentioned in draft) 3. Remove Clutch pedal Assembly. (Follow Accelerator pedal Removal procedure as above mentioned in draft) 4. Remove all mountings Hex FL nut M8 on control mounting bracket & take out bracket. FITMENT For fitment follow the reverse procedure of control bracket removal. Booster & control mounting nuts tightening torque 2~2.4 kgf-m. NOTE At the time of fitment apply thin coat of multi purpose grease on clevis pin. Align the axis of brake pedal hole with the Booster fork hole and after inserting the clevis pin through Booster fork and brake pedal check the free rotation of clevis pin.
RkJQdWJsaXNoZXIy MTIwNTUz