SUSPENSION 29 7. Remove Anti roll bar Assembly. 8. Remove the Engine C mount bracket bolt on subframe. 9. Remove Power Steering Gear Assembly mountings on Sub Frame. 10.Remove Four Mountings on sub Frame Assembly. 15. INSTALLATION OF SUBFRAME ASSEMBLY Follow the Reverse Procedure of removal of sub frame assembly. Sub frame to be aligned to BIW with help of pin & fixture. Locating holes are available in sub frame & BIW at rear. For tightening sub frame bolts, 6 point hex head socket is recommend. Don’t use 12 point hex socket. NOTE: Do not reuse subframe mounting bolt. It is only for one time use. Do not reuse the lower ball joint to knuckle mounting bolt & LCA front pivot bolt. Use Torx hex socket for tightening of LCA front pivot bolt.
RkJQdWJsaXNoZXIy MTIwNTUz