STEERING 19 vii. POWER STEERING OIL FLUSHING PROCEDURE : NOTE: Always use fresh Power Steering oil, for flushing. In case of non availability of sufficient quantity of fresh Power Steering oil, the drained oil may be used after filtering (use filter paper – Size: 10 microns). 1. Minimum quantity of oil required is 2 liters (If the filtered oil quantity is less add fresh oil) 2. Drain the oil from the system. (For procedure refer power steering oil replacement procedure.) 3. Fit new filter assembly and fill the system with fresh / filtered oil. (For procedure refer steering reservoir filter replacement procedure.) 4. Start the engine and allow it to run for few minutes. With the engine idling, steer the wheels from RH lock to LH lock at least 10 times. Ensure oil level does not drop below the suction fitting in the reservoir. 5. Stop the engine and drain the oil from the system. NOTE: Remove the filter cartridge used while flushing in step 3. Store it separately (it can be used again for flushing other vehicle). After flushing always use a new filter.
RkJQdWJsaXNoZXIy MTIwNTUz