C635 TRANSAXLE 29 30.Remove the lubricating duct by pulling upward. NOTE: The oil ducts are staked to the case and may require some grinding before removal. 31.Remove the shaft oil ducts from the case using a screwdriver or the equivalent. 10.TRANSAXLE ASSEMBLY ON BENCH NOTE: It is not necessary to reestablish preload shim thickness when new bearings are installed. It is only necessary to establish preload shim thickness when a transaxle housing component, gear shaft, or differential is replaced. Transmission and Transfer Case/Manual, Adjustments 1. Install the right and left side differential bearing races using below tools 2751 5890 2621 - Installer, Bearing Cup
RkJQdWJsaXNoZXIy MTIwNTUz