KRYOTEC ENGINE 99 viii. REMOVAL OF OIL SUMP 1. Remove mounting bolts on the oil sump and remove the oil sump. 2. Scrape out sealant on oil sump. 3. Remove mounting bolts and take out the oil sump separator. 4. Remove top and bottom mounting bolts and take out the oil strainer. ix. REMOVAL OF CYLINDER BLOCK SUBASSEMBLIES 1. Remove crankshaft position sensor. 2. Remove mounting bolts and take out oil pump. NOTE Seal and Gasket not to be reused. Bolts not to be reused. 3. Remove mounting bolts the crankshaft oil seal cover. NOTE Seal and Gasket not to be reused. Bolts not to be reused.
RkJQdWJsaXNoZXIy MTIwNTUz