TRANSAXLE 132 10. Tighten screw at the right torque 10 ± 1 Nm, following the order shown in the image below. 11. Connect the connector of the wiring harness on the ‘Transmission Control Unit’. NOTE Don’t reuse the AMT oil once it is drained 12. Fill the ‘Oil Tank’ with new ‘CS Speed’ oil, up to the Max. Level @ no pressure in the hydraulic circuit and restore it after the purge procedure. Screw the ‘Oil Tank Cap’ at the right torque 2 - 0.5 ± 1 Nm.
RkJQdWJsaXNoZXIy MTIwNTUz