TRANSAXLE (NANO AMT) 86 14. Remove the bush. CAUTION: the bush is heat press fitted if it’s hard to find dissemble form input shaft then we can directly remove the bearing retainer plate cover. 15. Remove spacer. 16. Rest the transaxle assembly on the front half and remove the bearing retainer plate by unscrewing the six M8 screws and remove the plate cover. 17. Remove the lay shaft and input shaft snap ring. 18. Unscrew the 11 bolts on the rear half housing, holding the front and rear half together. 19. Remove the Idler gear bolt and remove the washer.
RkJQdWJsaXNoZXIy MTIwNTUz