TRANSAXLE 61 ASSEMBLY: NOTE: Use only “MOLY KOTE P40” grease and avoid excessive application of grease. 1. Insert the shaft from top bush and simultaneously insert clutch release fork into shaft with correct position (lug at bearing side). 2. Tighten the fork on the shaft with hexagonal flange bolt (M8X25) by tightening torque 4.1mkg. 3. Place the clutch release bearing on the guide tube and smear some grease on it. Also apply grease at the point of contact between the bearing and the fork. 4. Place the clutch release lever on clutch release shaft and checked the correct position. 5. Insert the bolt into the clutch release lever hole & insert the nut and then tighten the bolt.
RkJQdWJsaXNoZXIy MTIwNTUz