HVAC 891 HVAC Inspection 1. Inspect for any external damage to drier cartridge. Replace the same if found damaged. Installation 1. First assemble the cartridge by pressing it inside KOMO tube till it fits into groove provided in KOMO Profile. CAUTION Cartridge should not expose to atmosphere. It should be assemble immediately after removing from packaged condition. 2. Assemble KOMO bottom plug by pressing it above cartridge until it clears retaining ring groove. 3. Assemble retaining ring into groove with help of plier. 4. Assemble plastic frame by pressing it on the KOMO side manifold until all snaps are properly locked. 5. Insert air cartridge assembly into condenser core and fix the cap on it. 6. Install condenser assembly on vehicle. (Refer condenser assembly installation procedure)
RkJQdWJsaXNoZXIy MTIwNTUz