HVAC 877 HVAC COMPRESSOR RELIEF VALVE ASSEMBLY - Apply compressor oil to the O-ring, and tighten the relief valve. Installation of compressor on vehicle 1. If a new compressor is to be fitted replenish the oil. (Refer flushing procedure of compressor) 2. Locate compressor over mounting bracket and tighten the bolts to the specified torque. TIGHTENING TORQUE FOR COMPRESSOR MOUNTING BOLTS = 2.2 + 0.2 kgf-m 3. Reconnect the electr ical connector of compressor clutch. 4. Fit new ’O’ rings to high and low pressure hose flanges, lubricate with refrigerant oil. 5. Fit high and low pressure hoses. 6. Fit compressor drive belt (Refer Compressor drive belt or AC belt installation procedure) 7. Evacuate and recharge air conditioning system (Refer Refrigerant Recovery, Recycling and Recharging) 8. Reconnect battery. 9. Perform a leak test on disturbed joints. (Refer Leak Test procedure) 10.Carry out AC functional check. (Refer A/C performance check procedure)
RkJQdWJsaXNoZXIy MTIwNTUz