ELECTRICAL 697 ELECTRICAL REMOVAL 1. Remove the tail gate. For “Removal & refitment of tail gate” refer Body group. 2. Remove the Rear shelf. For “Removal & refitment of rear shelf” refer Body group. 3. Disconnect the electrical connection. 4. Loosen the locking nut & take out the switch. INSPECTION: Check the continuity between oil pressures switch terminal (2) and cylinder block (3). Use multimeter to check switch continuity. During Engine running No continuity obtained At engine stand still Continuity obtained If check result is not as specified, replace oil pressure switch. REFITMENT : 1. Tighten the locking nut. 2. Connect the electrical connection 3. Fit the rear shelf& tail gate. OIL PRESSURE SWITCH FUNCTION : The Oil pressure switch monitors the engine oil pressure when the engine starts. It also sends an signal to the instrument cluster. LOCATION: It is located on cyl. Head.
RkJQdWJsaXNoZXIy MTIwNTUz