668 ELECTRICAL REMOVAL & REFITMENT OF WIPER MOTOR REMOVAL 1. Remove the wiper arm and blade assembly 2. Remove the cover. 3. Pull the wiper linkage (connecting wiper motor and wiper arm assembly) up (in the arrow direction). 4. Disconnect the electrical connector. 5. Remove the leaf screen. 6. Remove three screws securing wiper motor assembly with bracket to the body and take out wiper motor assembly with bracket. INSPECTION 1. Disconnect the windshield wiper motor connector. 2. Connect battery positive voltage to windshield wiper motor terminal Aor B, and ground to terminal D, then verify that the windshield wipers operate as shown in the table. If the windshield wipers do not operate as indicated in the table, replace the windshield wiper motor. Terminal connected to battery positive voltage Operation condition A HI B LO REFITMENT 1. Fit wiper motor assembly with bracket and tighten the mounting screws. 2. Connect electrical connector. 3. Engage the wiper arm linkage to wiper motor assembly. 4. Fit the leaf screen. 5. Fit the cover. 6. Fit the wiper arm & blade assy..
RkJQdWJsaXNoZXIy MTIwNTUz