662 ELECTRICAL REGISTRATION PLATE LAMP: EXPLODED VIEW REMOVAL & REFITMENT OF REGISTRATION PLATE LAMP REMOVAL 1. Remove rear bumper (Refer REMOVAL & REFITMENT OF REAR BUMPER” from Body section). 2. Disconnect the electrical connector. 3. Remove two screws and take out number plate Lamp. (Each side). REFITMENT 1. Fit two screws of number plate lamp. Connect the electrical connector. 2. Fit rear bumper. BULB REPLACEMENT PROCEDURE FOR REGISTRATION PLATE LAMP 1. Remove the lamp from the bumper. Refer “REMOVAL & REFITMENT OF REGISTRATION PLATE LAMP”. 2. Unscrew the screw from lens side. 3. Remove the lens & packing from assy. 4. Remove & replace the bulb from housing. 5. Position the lens & packing back. 6. Tighten the screw from lens side. 7. Tighten back the lamp assy on bumper. ROOF LAMP WITH MIRROR REMOVAL & REFITMENT OF ROOF LAMP WITH MIRROR REMOVAL 1. Pry out roof lamp panel. Remove four screws and take out roof lamp with mirror. REFITMENT 1. Tighten both mounting screws and fit Roof lamp along with mirror. 2. Fit roof lamp panel. BULB REPLACEMENT PROCEDURE FOR ROOF LAMP 1. Pry out roof lamp panel. 2. Remove the Bulb.
RkJQdWJsaXNoZXIy MTIwNTUz