588 STEERING SYSTEM 9. Turn the Housing in such a way that the Yoke Bore is upright and assemble the yoke (08) and spring (09) 10. Apply 2 to 3 drops of Loctite to the Yoke cover threads and tighten it to a torque of 70 kg cm. Now unscrew the yoke cover by 30 °and 45 ° approximately to achieve free pinion torque of 8 to 12 kgf - cm 11. Assemble the Bellow (18) on the Housing side and secure the bellow with Bellow strap (20) and Bellow clip (19) as shown in the fig. Scoop Silicon grease using Forefinger and apply on groove of IBJ prior to the Bellow assembly, to enable bellow to rotate relative to IBJ 12. Fit the Outer Ball joints (14 & 15) on either side of inner Ball joints 13. Check the free play of the gear at steering wheel side. (No tyre movement when steering wheel is turned)
RkJQdWJsaXNoZXIy MTIwNTUz