536 BRAKE SYSTEM DISASSEMBLY OF TANDEM MASTER CYLINDER : 01 TMC assembly 02 Secondary seal 03 Primary seal 04 Cup spacer 05 Primary piston assy 06 Gasket 07 Secondary piston stopper 08 Grommet 09 Boot 10 Secondary piston assy. 11 Circlip NOTE: Refer above exploded view while disassembly procedure, for better understanding of TMC components. 1. Remove spring pin by tapping with centre punch. 2. Hold the brake fluid reservoir by hand firmly; lift the same out of the rubber grommets (08) fitted on to the TMC inlet ports by rocking it on both sides.
RkJQdWJsaXNoZXIy MTIwNTUz