456 SUSPENSION SYSTEM White sticker arrow as shown (For mounting orientation) Both ends identical SHOCK ABSORBER NOTE: Refer Exploded view of Rear Suspension Components for removal and installation process. Removal 1. Remove wheel(s) (Refer wheel removal procedure/ Wheels and Tires group) 2. Support the semi trailing arm (01) (as shown below by arrow in fig. given below) so that: (a) It will keep the semi trailing arm from flying downward when the shock absorber is unbolted. (b) Drive shaft angles are not exceeded. 3. Remove the lower bolt (07) of shock absorber (05). 4. Remove the upper bolt (11) of shock absorber and take out the shock absorber (05). CAUTION : Hold the shock absorber while removing the bolt. Inspection: 1. Check the removed shock absorber for oil strains and bush damage/any scratch marks for rubbing of dust cover and outer tube. Replace the damaged parts. 2. Ensure shock absorber orientation such that dust cover is on top side. 3. Inspect shock absorber for any deformation or damage. Replace if found damaged. Installation CAUTION: Before installing shock absorber please see the white sticker on shock absorber which indicates the correct direction of mounting.
RkJQdWJsaXNoZXIy MTIwNTUz