SUSPENSION SYSTEM 447 SUSPENSION 9. Assemble cup support assembly on mount followed by inner support. 10. Put spring washer and tighten hexagonal nut to specified torque. TIGHTENING TORQUE FOR STRUT HEXAGONAL NUT = 4.6 Kg-m 11. Remove spring compressor tool from the coil spring uniformly. NOTE: 1. After installation of all parts, check dust seal for correct fitment on bearing seat. Coil spring should be properly seated on spring seat and with correct orientation. 2. After assembly of strut, ensure support cup assembly rotates which conf irms correct assembly. UP NOTE: Apply grease lithinumMP SS: 6805 TP 2 - 301 TS: 25205 on top of thrust bearing surface. 5. Assemble bearing seat on thrust bearing. 6. Assemble dust seal on bearing seat. CAUTION: Ensure that seal is uniformly seated on the outer periphery of bearing seat. 7. Assemblemount seat and install on strut assembly. NOTE: Seethedirectionofmountseatwhileassembly. 8. Assemble support cup assemblywith stopper.
RkJQdWJsaXNoZXIy MTIwNTUz