422 DRIVETRAIN CAUTION : (a) Eared clamp must be placed at correct position while crimping i.e. it should be crimped at the solid or outer portion of tulip joint. Do not crimp the clamp at the depression area of the joint (as shown below) as this will decrease the clamping load, which may lead to grease leakage and/ or intrusion of water/debris. (b) Do not squeeze or distort boot when crimping it in boot clamps. Distorted boot caused by squeezing air may reduce its durability. 9. Crimp both boot clamps (large and small) (6 and 9) with the help of crimping tool. (Part No. 2704 5890 33 32). 8. Align the spring with the groove of the joint.
RkJQdWJsaXNoZXIy MTIwNTUz