DRIVETRAIN 387 DRIVETRAIN 7. Measure the backlash using a dial gauge; it should be within 0.0 ~ 0.1 mm. Backlash can be adjusted varying the bevel gear washers. 8. Insert the dowel sleeve, to lock the spider to the cage. Note: • Bevel gears and bevel pinions are interchangeable as a set only and not individually. • Make sure that the Bevel gears and pinions are rotating. 9. Place the speed gear on the cage, such that the teeth face towards differential gear. 10. Fit the ball bearings on both ends using Tool no. 2834 5890 26 05 DRIFT FOR FITMENT OF DIFFERENTIAL BEARING, Make sure that the stamped side should project upwards.
RkJQdWJsaXNoZXIy MTIwNTUz