382 DRIVETRAIN 6. On proper fitment the groove will be just above the fork in assembled condition. 7. Then fit the dowel (spiral) pin such that it does not protrude out from both ends by holding the fork and shaft assembly in a vice and using a suitable drift. 8. Assemble the reverse gear shifter by inserting the shifter dog followed by the shifter finger from the end which has the slots. 9. Then fit the dowel (Spiral) pin such that it does not protrude from both ends. REVERSE GEAR SHIFTER BRACKET - ASSEMBLY 1. Place the barrel with spring onto the reverse idler shaft bracket. 2. Place the ball on the spring.
RkJQdWJsaXNoZXIy MTIwNTUz