DRIVETRAIN 379 DRIVETRAIN 10. Fit the circlip in the slot. 11. Measure the gap between the second gear and the circlip; it should be within 0.2 ~ 0.4mm. 12. Place the third gear on the circlip such that the groove in its bottom (provided for circlip) rests on the circlip. 13. Place the Spacer washer on the third gear. 14. Place the fourth gear on the spacer, with the flat surface facing downwards. 15. Fit the rear half side ball bearing, using a suitable 2702 5890 35 04 (Drift for rear hub inner bearing outer race), . Such that the groove on the shaft can be seen.
RkJQdWJsaXNoZXIy MTIwNTUz