370 DRIVETRAIN 5. Remove the Circlip (01) holding the Third gear Wheel and remove the Third gear wheel (02). INPUT SHAFT ASSEMBLY A. DISMANTLING 2. Remove the circlip using a circlip plier. 4. Remove the Spacer (01), Fourth gear wheel (02), and Shifter Sleeve assembly (03). 1. Hold Input shaft in a bench vice. Note: To ensure that the gears/ splines do not get damaged by the vice jaws, pad it with wooden pieces or any other softer material. Note: • Do not reuse the circlip. • Replace the circlip with a new one of the same thickness during assembly. 3. Fit tool No. (2834 5890 26 04) PULLER FOR REMOVAL OF REAR BRG. FROM INPUT SHAFT & LAYSHAFT and remove the front end bearing.
RkJQdWJsaXNoZXIy MTIwNTUz