DRIVETRAIN 367 DRIVETRAIN 8. Rest the transaxle assembly on the Front half and remove the rear cover by unscrewing the six M8 Bolts (01) and remove the rear cover (02). 9. Remove the layshaft and input shaft circlip, using a standard circlip plier. 10. Unscrew the 13 bolts on the rear half housing, holding the front and rear half together. 11. Remove the Idler gear bolt (01) and the Magnetic drain plug (02) and by unscrewing it. Remove the washer (03). 12. Separate the rear half housing (01) from the front half (02) by lifting the rear half.
RkJQdWJsaXNoZXIy MTIwNTUz