DRIVETRAIN 335 DRIVETRAIN Fitment: For fitment follow the reverse order of the removal procedure, using the Tool 2834 5890 25 01 (Clutch Mandrel) and tighten the M8 bolts to a torque of 3.2 Kg m. Do not mix clutch mounting bolts with other fasteners. Do not use longer or shorter screws. Longer screws may not tighten the clutch at all. Shorter screws will not provide enough threads to achieve desired tightening. While tightening clutch mounting screws check aligning mandrel for continuous free sliding to ensure concentric installation of clutch disc which will avoid trouble during installation of transaxle. NOTE 4. Remove upper bush on housing. (b) Clutch Actuation Mechanism Overhaul Disassembly: 1. Remove the hexagonal nut (1) & bolt (2) to loosen clutch release lever (3). 2. Now take out the clutch release lever (3). 3. Remove external return spring (4). 5. Disconnect the internal return spring from the front half housing. 6. Disconnect the clutch release bearing by releasing the locking clip.
RkJQdWJsaXNoZXIy MTIwNTUz