ENGINE 273 MPFI 301 ENGINE TESTER TROUBLE SHOOTING: 1) LEDs status on the Silicon Engine 2) COM Port Connection - Check the OBD cable connection with Diagnost ic Connector of Wiring Harness. - Check the OBD cable connection with Multi Protocol Interface module. - Check the ‘DSR’ and ‘TR’ leds on Silicon Engine module. If both are Red reinitialize the unit. ECU Communication Error 3) Loose connections in the OBD connector or we can say Back out of Pins at OBD connector then tester will not communicate. 4) If the Installation files are not properly installed, at the time of instal lat ion then i t wi l l not communicate. 5) If you are using USB port silicon engine, and in tester you are selecting RS 232 port, then also it will not communicate. 6) Faulty Hardware (Silicon Engine). Corrupt version of software - Check the COM settings. - Connect RS232 Cable to Com Port. - Proper and working hardware. - Proper Wiring connections. - Proper selection in the software. Reinstall the software. Software not working Problem Cause Remedy
RkJQdWJsaXNoZXIy MTIwNTUz